Test Server: AWS Issue: Panel is inaccessible after installing the panel. The panel cannot be accessed after modifying the port. Log in to your aws console, Find your security group settings, Make more screenshots to do the following settings

Hello aaPanel_Jose I have successfully installed aapanel, but it gives me the following access data: aaPanel Internet Address: aaPanel Internal Address: Warning: If you cannot access the panel, release the following port (8888|888|80|443|20|21) in the security group I released it as shown in the screenshot below, but still without access to the panel: /

Hello, you can c[root@power ~]# nmap 3.19.54.162 Starting Nmap 6.40 ( http://nmap.org ) at 2021-02-27 21:17 CST Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 3.07 seconds [root@power ~]# telnet 3.19.54.162 8888 Trying 3.19.54.162... telnet: connect to address 3.19.54.162: Connection timed outonsult aws over there, it is not possible to connect nmap and telnet to your port 8888 here

hello i need help, i have successfully installed aapanel but i can't access to login to the dashboard. I use AWS Lightsail

aaP_ramdaniamarulloh Go to your instance, access Networking tab and open ports for aaPanel from here.

Turn off your Firewall: sudo ufw disable on Ubuntu or sudo systemctl stop firewalld on CentOS 7 Then try accessing the dashboard. If it still doesn't work, than run sudo iptables -F to flush the iptables. Than re-enable the firewall later either in the Security Section or by install the SYS Firewall plugin from the App Store.

Actually, you don't have to run the disable firewall command. You can just run the sudo iptables -F command instead. However if that doesn't work, then you would have to run the disable firewall command

hello I changed the port from 7800 to 8888 and now the aapanel does not come in, it is not possible to find this page

aaP_wagnerlimawwnpr Hello, is port 8888 open in the system firewall? Is the server provider's firewall open on port 8888? The system firewall can open the firewall by executing the following commands: firewall-cmd --permanent --zone=public --add-port=8888/tcp >/dev/null 2>&1 /sbin/ufw allow 8888/tcp The server provider needs to open to the provider's background. Is the link fully entered? You can use the bt 14 command to view the default link

It encountering any problems? Warning: If you cannot access the panel, release the following port (7800|888|80|443|20|21) in the security group

Hello, please describe your problem in detail. aaP_xiaoyeoh8888

How to release the aaPanel port

aaP_xiaoyeoh8888

aaPanel_Kern Ok done my email is xiaoyeoh8888@gmail.com please check your emailbox

aaPanel_Kern

use http acces

aaP_xiaoyeoh8888

@"aaPanel_Kern"#p69510xxx
Can't

aaPanel_Kern

aaP_xiaoyeoh8888
Is it normal to try changing the browser and using incognito mode?
My access is normal

aaP_xiaoyeoh8888

@"aaPanel_Kern"#p69513xx
16x4.75 sent an invalid response.

aaPanel_Kern

aaP_xiaoyeoh8888

rid3xyoy

Set A record for domain name to panel IP
Turn of Panel SSL

Set panel domain
### This site cannot be accessed

==================================================================
aaPanel Internet Address: https://panel.domain:25841/ujdsfsdf90
aaPanel Internal Address: https://192.168.1.112:25841/ujdsfsdf90

What else should I do? panel.domain on port 80 and 443 is load defualt website.

aaPanel_Kern

Hello, what information does it prompt that you cannot access? The A record of the domain name must point to the server IP and cannot be a proxy
It is recommended that you cancel the domain name binding. You can use the command bt 12

rid3xyoy

aaP_tmjwda003

[root@n0kia2k7 ~]# curl http://127.0.0.1:$(cat /www/server/panel/data/port.pl)/login
curl: (56) Recv failure: Connection reset by peer
what error for this. im newbie,

aaPanel_Kern

Hello, please ask if you are using the correct protocol to access aapanel?
You can use the bt 14 command to view

aaP_tmjwda003

rid3xyoy

aaPanel_Kern
After disabled panel SSL and added domain name, panel keep redirecting me tohttpS://panel.domain.
How can i disable this redirect?
Test in Firefox with HTTPS-Only Mode OFF

aaPanel_Kern

Hello, is it solved if you try using incognito mode or changing browser access?
If the domain name cannot be used, it is recommended to use the ssh tool to cancel the domain name first: bt 12
Also try canceling ssl: bt 27

rid3xyoy

aaPanel_Kern There is no way I can access the domain.
No matter what settings I do in the browser it always redirects me to the https version. Tested on several different devices.

I know how to solve a problem using bt commands, which are very convenient by the way.

aaPanel_Kern

Hi, does the domain name point to the server's IP and is not using a proxy?
Is it normal to access in incognito mode after closing the browser completely?

rid3xyoy

aaPanel_Kern Hmm, disabled BasicAuth and and everything is fine now.
Problem solved.

jjjwan

I have same trouble like this.. i've tried like restart the server, using bt command, and its not change anything My AAPanel is still "Cant Reach the Site" But in this server there's some web that i made and its working without any trouble. The only one that is in Trouble i the AAPanel i cant access the site. Can somebody help me with my trouble ?

aaPanel_Kern

Hello, please check whether the bt service is running: bt status
If not running please start it: bt start
Also check if you use the full link to access the panel: bt 14

jjjwan

aaPanel_Kern I already do that.. My AAPanel service is running.. the website that i made is working.. but when i try to access the AAPanel it's show "Cant Reach the Site". I ussually using command : systemctl status httpd, bt 14, bt status, and i even tried " touch www/server/panel/data/debug.pl && bt 1 && bt 14. And the panel site still unreachable. Do you have any suggestion about this trouble ?

aaPanel_Kern

Hello, try using this script to check if it is normal?

curl -k https://www.aapanel.com/script/aapanel_check.sh | bash

jjjwan

aaPanel_Kern

Tried with "https" to access the panel and it's work. Thanks for helping me 🙂)

« Previous Page Next Page »