Hi, when installing PHP 8.1 it seems the fileinfo extension is missing and the imagemagick extension won't install. Both are recommended for WordPress installations. Also apcu is also missing from the install list but I'm not sure if that one is even needed.

I've had similar issues with imagemagick refusing to install under 8.1 I've tried to install PHP 8.1 fast and compiled. The first time, no extension appeared. The second time they appeared and I could install them except imagemagick. I have the same issue as your other post: i.e. can't actually switch any websites to use PHP 8.1 I am using PHP 8 at the moment.

aaP_rob Yes same here but i managed to get 8.1 working by creating a couple of files and then pointing the site config to php81. It may say it's running another php but it's running 8.1 fine. @aaPanel_Jose Any chance when you fix PHP8.1's imagick and add fileinfo and apcu extentions could you also add igbinary. Enabling redis-zstd on the redis extension would be very much appreciated. 🙂

pclweb Hello, this suggestion has been fed back to the corresponding development discussion. Thank you for your feedback.

pclweb hi bro You just need apcu and igbinary in PHP8.1, right? I have added apcu and igbinary support to PHP8.1.

aapanel_sniper I also would love to have all I use from the tab extensions: fileinfo opcache redis apcu exif

Hello, the suggestion has been fed back. Thank you for your valuable suggestions.

aapanel_sniper hi, Thanks of adding apcu and igbinary. Could you add the missing ''fileinfo' and fix the 'imagemagick' and 'php igbinary' extensions so i can install them. Also igbinary and zstd need to be compiled with the phpredis extension i.e --enable-redis-igbinary --enable-redis-zstd to work great with redis caching. It is recommended to compile PhpRedis with igbinary and zstd support. Igbinary works about twice the speed of Redis data serialization and about 50% reduction in size. Zstd is a compression algorithm that is done at the extension level without a lot of CPU overhead. if(window.hljsLoader && !document.currentScript.parentNode.hasAttribute('data-s9e-livepreview-onupdate')) { window.hljsLoader.highlightBlocks(document.currentScript.parentNode); } Thanks

pclweb should I wait for zstd? 22.12.2021-Available extensions in in 8.1: opcache Memcached redis apcu imagemagick exif deadline snmp ldap enchant pspell bz2 sysvshm calendar gmp sysvmsg igbinary

idflorin in 8.1 on a clean VPS with Centos 7 I can't install EXIF - shows installing but it does nothing I can't install igbinary - shows installing but it does nothing

Extensions missing on PHP 8.1 install

aapanel_sniper

pclweb Thank you for sharing.

idflorin

aapanel_sniper igbinary now works in 8.1, but fileinfo gives:
`checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /opt/rh/devtoolset-7/root/usr/bin/gcc accepts -g... yes
checking for /opt/rh/devtoolset-7/root/usr/bin/gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... /opt/rh/devtoolset-7/root/usr/bin/gcc -E
checking for icc... no
checking for suncc... no
checking for system library directory... lib
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking for PHP prefix... /www/server/php/81
checking for PHP includes... -I/www/server/php/81/include/php -I/www/server/php/81/include/php/main -I/www/server/php/81/include/php/TSRM -I/www/server/php/81/include/php/Zend -I/www/server/php/81/include/php/ext -I/www/server/php/81/include/php/ext/date/lib
checking for PHP extension directory... /www/server/php/81/lib/php/extensions/no-debug-non-zts-20210902
checking for PHP installed headers prefix... /www/server/php/81/include/php
checking if debug is enabled... no
checking if zts is enabled... no
checking for gawk... gawk
checking for fileinfo support... yes, shared
checking for strcasestr... yes
checking for utimes... yes
checking for strndup... yes
checking for a sed that does not truncate output... /bin/sed
checking for ld used by /opt/rh/devtoolset-7/root/usr/bin/gcc... /opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld
checking if the linker (/opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld) is GNU ld... yes
checking for /opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld option to reload object files... -r
checking for BSD-compatible nm... /bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 1572864
checking command to parse /bin/nm -B output from /opt/rh/devtoolset-7/root/usr/bin/gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if /opt/rh/devtoolset-7/root/usr/bin/gcc supports -fno-rtti -fno-exceptions... no
checking for /opt/rh/devtoolset-7/root/usr/bin/gcc option to produce PIC... -fPIC
checking if /opt/rh/devtoolset-7/root/usr/bin/gcc PIC flag -fPIC works... yes
checking if /opt/rh/devtoolset-7/root/usr/bin/gcc static flag -static works... no
checking if /opt/rh/devtoolset-7/root/usr/bin/gcc supports -c -o file.o... yes
checking whether the /opt/rh/devtoolset-7/root/usr/bin/gcc linker (/opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no

creating libtool
appending configuration tag "CXX" to libtool
checking whether the /opt/rh/devtoolset-7/root/usr/bin/g++ linker (/opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld -m elf_x86_64) supports shared libraries... yes
checking for /opt/rh/devtoolset-7/root/usr/bin/g++ option to produce PIC...
checking if /opt/rh/devtoolset-7/root/usr/bin/g++ static flag works... yes
checking if /opt/rh/devtoolset-7/root/usr/bin/g++ supports -c -o file.o... yes
checking whether the /opt/rh/devtoolset-7/root/usr/bin/g++ linker (/opt/rh/devtoolset-7/root/usr/libexec/gcc/x86_64-redhat-linux/7/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... unsupported
configure: patching config.h.in
configure: creating ./config.status
config.status: creating config.h
config.status: config.h is unchanged
/bin/sh /www/server/php/81/src/ext/fileinfo/libtool --mode=compile /opt/rh/devtoolset-7/root/usr/bin/gcc -I. -I/www/server/php/81/src/ext/fileinfo -I/www/server/php/81/src/ext/fileinfo/include -I/www/server/php/81/src/ext/fileinfo/main -I/www/server/php/81/src/ext/fileinfo -I/www/server/php/81/include/php -I/www/server/php/81/include/php/main -I/www/server/php/81/include/php/TSRM -I/www/server/php/81/include/php/Zend -I/www/server/php/81/include/php/ext -I/www/server/php/81/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -I/www/server/php/81/src/ext/fileinfo/libmagic -DZEND_COMPILE_DL_EXT=1 -c /www/server/php/81/src/ext/fileinfo/libmagic/softmagic.c -o libmagic/softmagic.lo -MMD -MF libmagic/softmagic.dep -MT libmagic/softmagic.lo
/opt/rh/devtoolset-7/root/usr/bin/gcc -I. -I/www/server/php/81/src/ext/fileinfo -I/www/server/php/81/src/ext/fileinfo/include -I/www/server/php/81/src/ext/fileinfo/main -I/www/server/php/81/src/ext/fileinfo -I/www/server/php/81/include/php -I/www/server/php/81/include/php/main -I/www/server/php/81/include/php/TSRM -I/www/server/php/81/include/php/Zend -I/www/server/php/81/include/php/ext -I/www/server/php/81/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -I/www/server/php/81/src/ext/fileinfo/libmagic -DZEND_COMPILE_DL_EXT=1 -c /www/server/php/81/src/ext/fileinfo/libmagic/softmagic.c -MMD -MF libmagic/softmagic.dep -MT libmagic/softmagic.lo -fPIC -DPIC -o libmagic/.libs/softmagic.o
In file included from /usr/include/string.h:633:0,
from /www/server/php/81/include/php/main/../main/php_config.h:2210,
from /www/server/php/81/include/php/Zend/zend_config.h:1,
from /www/server/php/81/include/php/Zend/zend_portability.h:43,
from /www/server/php/81/include/php/Zend/zend_types.h:25,
from /www/server/php/81/include/php/Zend/zend.h:27,
from /www/server/php/81/include/php/main/php.h:31,
from /www/server/php/81/src/ext/fileinfo/libmagic/config.h:1,
from /www/server/php/81/src/ext/fileinfo/libmagic/file.h:36,
from /www/server/php/81/src/ext/fileinfo/libmagic/softmagic.c:32:
/www/server/php/81/src/ext/fileinfo/libmagic/softmagic.c:507:7: error: expected identifier or ‘(’ before ‘extension’
char *strndup(const char *, size_t);
^
/www/server/php/81/src/ext/fileinfo/libmagic/softmagic.c:510:1: error: expected identifier or ‘(’ before ‘extension’
strndup(const char *str, size_t n)
^
make: *** [libmagic/softmagic.lo] Error 1
error
|-Successify ---Script execution completed---`
for me now EXIF is not necessary

idflorin

aapanel_sniper country or region does your VPS belong to

Germany (its a VPS from Contabo)

aapanel_sniper

idflorin
Dear users, I am very sorry😥
The Linux7 series is currently not supported by PHP8.1 fileInfo, which includes Centos 7.x, Oracle7.x, or other readhat7.x
We are working on php8.1 fileInfo support for these systems.

aapanel_sniper

pclweb
Good morning, guys
I have added extensions to ZMQ and ZSTD, please refresh the App Store for updates, if not please clear the browser cache.😁

idflorin

aapanel_sniper good to know. thank you.

steve

can you also add opcache?

idflorin

steve opcache is available

aapanel_sniper

steve
Opcache works, if yours doesn't, please take a screenshot of the message box in the arrow direction and post the installation logs to me

steve

aapanel_sniper Thanks, opcache is working. However, imagemagick isn't getting installed when I try it.

pclweb

steve It seems it's trying to install an old incompatible version of imagick but you can add the new one via command with the following. Change the PHP version below if you need it to work for a different PHP edition.

cd
wget https://pecl.php.net/get/imagick-3.6.0.tgz -T 5
tar zxvf imagick-3.6.0.tgz
rm -f imagick-3.6.0.tgz
cd imagick-3.6.0
/www/server/php/81/bin/phpize
./configure --with-php-config=/www/server/php/81/bin/php-config
make && make install
cd ../
rm -rf imagick-3.6.0

Don't forget to add this line to your PHP configuration file at the bottom.
extension = /www/server/php/81/lib/php/extensions/no-debug-non-zts-20210902/imagick.so

And then restart PHP. Reopen your php extensions list and it should now be showing as installed.

aapanel_sniper

steve
Good evening.
Oracle Linux 8 already provides PHP8.1 imagick support. Please try installing Imagick again.😀

pclweb

pclweb https://www.aapanel.com/forum/d/5786-extensions-missing-on-php-81-install/26

aaP_thomas_marcelino

pclweb wget https://pecl.php.net/get/imagick-3.6.0.tgz -T 5

enas to update the procedure that worked for me.
wget https://pecl.php.net/get/imagick-3.7.0.tgz -T 5

carlita

pclweb
Thanks!! this was the only way I could install imagick in php 8.1 😅
You are a savior!

steve

pclweb Thanks! I'm getting the following error after "make && make install":

Installing shared extensions: /www/server/php/81/lib/php/extensions/no-debug-non-zts-20210902/
cp: cannot create regular file '/www/server/php/81/lib/php/extensions/no-debug-non-zts-20210902/#INST@807094#': Permission denied
make: *** [Makefile:90: install-modules] Error 1

pclweb

steve Are you running as root? It looks like you don't have permissions.

steve

pclweb Yeah, that was my mistake. But it's working now on the automatic install.

Btw, do you have any suggestions on how to install Brotli? I asked on another thread but no one answered. I'm using an Apache server.

steve

aapanel_sniper Works now, thank you!

tkumarpatna

aapanel_sniper file info & exif not installing on centos 7

pclweb

steve no sorry i use nginx

aapanel_sniper

tkumarpatna
The Linux7 series is currently not supported by PHP8.1 fileInfo, which includes Centos 7.x, Oracle7.x, or other readhat7.x😅
We are working on php8.1 fileInfo support for these systems.

aaP_rob

pclweb What files did you create to get 8.1 to appear on the websites Php version selector pane please. I still can’t get 8.1 to appear when I install it via compiled or fast. TIA

aapanel_sniper

aaP_rob
Currently, php8.1 is recommended to be compiled and installed

pclweb

aaP_rob After you install via compile option then click the fix button to fix the panel.

« Previous Page Next Page »