My config is this: I have installed aapanel, transported my wordpress project insider, i created email +roundcube. What I try to do is following: Making my ActiveCampaign + my wordpress smpt (popular wp plugin) + my aapanel smtp relay system to work together. Errors I have: 1. My Roundcube take mails to inbox but not send anything even to spam or inbox, i try to fix this. 2 My Smtp Relay not autentificate to my smtp wordpress because of a SSL error, but I have created for my subdomains mail.example.com a domain in aapanel and i have created a Letsencrypt ssl for all this domain that I try to make comunicate by email. 3 I have try to use port 25 for the 127.0.0.1 but not work for me because my smtp wp + smtp relay is "in the same server managed by aapanel" What I need to do is to make roundcube send the emails + smtp relay to work on a crypted comunication like port 467 because in the end I try to make a synergy with the activecampaign that use the same 467 SSL for communication. Thank you, any tips will be grateful for myself, I have check the forum on this subject but on my end was not work

Default port for SMTP is 465 fo SSL . Make sure you have your hostname that sends the emails installed with ssl. For example your website is called domain.com and you set mail server with mail.domain.com. Add mail.domain.com to the panel as website and point it by IP , then install SSL. Or just use domain.com as smtp hostname and make sure SSL works. IF you want another level of encryption like TLS you can try port 587. Cheers

aaP_bobmarley4777 check the postfix configuration, which can be viewed in the server status "mail.135mailtest.com" is replaced with your domain name Put: smtpd_tls_chain_files=/etc/ssl/private/ssl-cert-snakeoil.key,/etc/ssl/certs/ssl-cert-snakeoil.pem Change to: smtpd_tls_chain_files = /www/server/panel/plugin/mail_sys/cert/135mailtest.com/privkey.pem,/www/server/panel/plugin/mail_sys/cert/135mailtest.com/fullchain.pem Note to replace 135mailtest.com with your domain name. Also check /www/server/panel/plugin/mail_sys/cert/135mailtest.com/ for privkey.pem and fullchain.pem files You can use this command to check whether the correct SSL is configured openssl s_client -connect mail.135mailtest.com:587 -starttls smtp or openssl s_client -connect mail.135mailtest.com:465 -starttls smtp If the display is not OK, try to save the SSL certificate again, or please re-apply for SSL

THANK YOU VLADIMIR-SERVER, thank you for the tip, yes I do everything from scratch after I have post here on the forum and works good, smtp relay is my problem right now because a snakeoil.pem file that is not find. I will try to use 456 for SSL + WP SMTP + SSL RELAY + MAIL SERVER. Thank you really much for the effort of helping me! I reinstalled again the aaPanel, I have created mail + site + domains + ssl + roundcube like I saw on this forum, works great even roundcube with new settings. Now I try to make the path in Postfix to check the correct path in order for myself to use SMTP RELAY and to bind the SMTP relay to the SMTP WORDPRESS PLUGIN that are on the same server with aaPanel, this is what all I need to do. When I use roundcube it works perfect and sending to the inbox, but when I open the smtp relay from aaPanel it not send because postfix try to autentificate to a .pem file that is not there 🙂) for some reason, could be a bug I not know. This is my postfix log: Apr 22 21:19:28 vmi1812900 postfix/smtps/smtpd[10567]: lost connection after CONNECT from unknown[94.207.106.37] Apr 22 21:19:28 vmi1812900 postfix/smtps/smtpd[10567]: disconnect from unknown[94.207.106.37] commands=0/0 Apr 22 21:19:38 vmi1812900 postfix/smtps/smtpd[10567]: connect from unknown[211.228.113.27] Apr 22 21:19:39 vmi1812900 postfix/smtps/smtpd[10567]: SSL_accept error from unknown[211.228.113.27]: -1 Apr 22 21:19:39 vmi1812900 postfix/smtps/smtpd[10567]: warning: TLS library problem: error:1417A0C1:SSL routines:tls_post_process_client_hello:no shared cipher:../ssl/statem/statem_srvr.c:2283: Apr 22 21:19:39 vmi1812900 postfix/smtps/smtpd[10567]: lost connection after CONNECT from unknown[211.228.113.27] Apr 22 21:19:39 vmi1812900 postfix/smtps/smtpd[10567]: disconnect from unknown[211.228.113.27] commands=0/0 Apr 22 21:19:51 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=10573, secured, session=<Wi1PUrQWCNF/AAAB> Apr 22 21:19:51 vmi1812900 dovecot: imap( contact@alinaroman.ro )<10573><Wi1PUrQWCNF/AAAB>: Logged out in=173 out=1089 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Apr 22 21:20:08 vmi1812900 postfix/smtpd[10576]: warning: /etc/postfix/main.cf, line 69: overriding earlier entry: relayhost= Apr 22 21:20:08 vmi1812900 postfix/submission/smtpd[10576]: warning: error opening chain file: /etc/ssl/private/ssl-cert-snakeoil.key: No such file or directory Apr 22 21:20:08 vmi1812900 postfix/submission/smtpd[10576]: connect from unknown[109.206.237.176] Apr 22 21:20:08 vmi1812900 postfix/submission/smtpd[10576]: disconnect from unknown[109.206.237.176] ehlo=1 auth=0/1 rset=0/1 quit=1 commands=2/4 Apr 22 21:21:39 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=10588, secured, session=<dwvBWLQWouJ/AAAB> Apr 22 21:21:39 vmi1812900 dovecot: imap( contact@alinaroman.ro )<10588><dwvBWLQWouJ/AAAB>: Logged out in=91 out=950 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0

aaP_bobmarley4777 : This what I have in the folder that is checked by postfix for the pem file: root@vmi1812900:/etc/ssl/private# ls my-mail-server.key pure-ftpd-dhparams.pem pure-ftpd.pem root@vmi1812900:/etc/ssl/private#

I have do what Kern do, thank you Kern, the openssl s_client -connect mail.135mailtest.com:587 -starttls smtp worked good an it output for me the key test. Now I setup the SMTP from Wordpress also the SMTP RELAY on port 587 TLS and I try to see if all work good, if not, I might output here the log of postfix.

My logs after I send a test email from roundcube with smtp relay open looks like this: Action: failed Status: 5.4.0 Remote-MTA: dns; mail.alinaroman.ro Diagnostic-Code: smtp; 554 5.4.0 Error: too many hops My mail log looks like this: Apr 22 23:16:59 vmi1812900 postfix/anvil[2928]: statistics: max cache size 2 at Apr 22 23:13:39 Apr 22 23:17:39 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3022, secured, session=<ixGa97UW3s9/AAAB> Apr 22 23:17:39 vmi1812900 dovecot: imap( contact@alinaroman.ro )<3022><ixGa97UW3s9/AAAB>: Logged out in=91 out=950 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Apr 22 23:18:39 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3027, secured, session=<U8ks+7UWbOl/AAAB> Apr 22 23:18:39 vmi1812900 dovecot: imap( contact@alinaroman.ro )<3027><U8ks+7UWbOl/AAAB>: Logged out in=91 out=950 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Apr 22 23:19:07 vmi1812900 postfix/smtpd[3028]: warning: /etc/postfix/main.cf, line 69: overriding earlier entry: relayhost= Apr 22 23:19:07 vmi1812900 postfix/proxymap[3029]: warning: /etc/postfix/main.cf, line 69: overriding earlier entry: relayhost= Apr 22 23:19:07 vmi1812900 postfix/smtpd[3028]: warning: error opening chain file: /www/server/panel/plugin/mail_sys/cert/alinaroman.ro//www/server/panel/plugin/mail_sys/cert/alinaroman.ro/fullchain.pem: No such file or directory Apr 22 23:19:07 vmi1812900 postfix/smtpd[3028]: connect from unknown[109.206.237.176] Apr 22 23:19:07 vmi1812900 postfix/anvil[3030]: warning: /etc/postfix/main.cf, line 69: overriding earlier entry: relayhost= Apr 22 23:19:09 vmi1812900 postfix/smtpd[3028]: warning: unknown[109.206.237.176]: SASL LOGIN authentication failed: UGFzc3dvcmQ6 Apr 22 23:19:09 vmi1812900 postfix/smtpd[3028]: disconnect from unknown[109.206.237.176] ehlo=1 auth=0/1 quit=1 commands=2/3 Apr 22 23:19:39 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3034, secured, session=<BdTA/rUWlql/AAAB> Apr 22 23:19:39 vmi1812900 dovecot: imap( contact@alinaroman.ro )<3034><BdTA/rUWlql/AAAB>: Logged out in=91 out=950 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Apr 22 23:20:39 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3045, secured, session=<sbZSArYWgqR/AAAB> Apr 22 23:20:39 vmi1812900 dovecot: imap( contact@alinaroman.ro )<3045><sbZSArYWgqR/AAAB>: Logged out in=91 out=950 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Apr 22 23:21:02 vmi1812900 dovecot: imap-login: Login: user= contact@alinaroman.ro , method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3047, secured, session=<DFK0A7YWIq1/AAAB> Apr 22 23:21:02 vmi1812900 dovecot: imap( contact@alinaroman.ro )<3047><DFK0A7YWIq1/AAAB>: Logged out in=91 out=950 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0

I think my server is loop to many times because I use all eggs into the same server, any tips? I have no idea how to fix this right not, I need to check up the internet.

I have found something, my config file of postfix is not good I think because "mydestination" is empty, I think should be localhost or 127.0.0.1, maybe Kern knows something about this, I try to check myself on internet how to make it not loop in "walls". All my eggs/servers are in same place so I need to configure this to "flow" good. -myhostname = vmi1812900.contaboserver.net alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all

After some tweaks, it sends from email1 to email1, looping : 20240423011637.7229B2001B97@vmi1812900.contaboserver.net : stored mail into mailbox 'INBOX' Apr 23 03:16:37 vmi1812900 postfix/lmtp[4502]: 7229B2001B97: to= contact@alinaroman.ro , relay=vmi1812900.contaboserver.net[private/dovecot-lmtp], delay=0.04, delays=0/0.01/0.01/0.01, dsn=2.0.0, status=sent (250 2.0.0 contact@alinaroman.ro zo9mHfULJ2aXEQAA46gUhQ Saved) Apr 23 03:16:37 vmi1812900 dovecot: lmtp(4503): Disconnect from local: Client has quit the connection (state=READY) Apr 23 03:16:37 vmi1812900 postfix/qmgr[4451]: 7229B2001B97: removed

check the postfix configuration, which can be viewed in the server status "mail.135mailtest.com" is replaced with your domain name Put: smtpd_tls_chain_files=/etc/ssl/private/ssl-cert-snakeoil.key,/etc/ssl/certs/ssl-cert-snakeoil.pem Change to: smtpd_tls_chain_files = /www/server/panel/plugin/mail_sys/cert/135mailtest.com/privkey.pem,/www/server/panel/plugin/mail_sys/cert/135mailtest.com/fullchain.pem Note to replace 135mailtest.com with your domain name. Also check /www/server/panel/plugin/mail_sys/cert/135mailtest.com/ for privkey.pem and fullchain.pem files aaP_bobmarley4777

SMTP RELAY + AAPANEL+ ROUNDCUBE

aaP_bobmarley4777

aaPanel_Kern Hey Kern, My config file is the default one, i put config file here, now I have the smtp relay off because i try to put the ssl of main domain to the webmail domain and not get forced by SSL, here it goes the config file, take a look, default one: # See /usr/share/postfix/main.cf.dist for a commented, more complete version

Debian specific: Specifying a file name will cause the first

line of that file to be used as the name. The Debian default

is /etc/mailname.

#myorigin = /etc/mailname

smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no

appending .domain is the MUA's job.

append_dot_mydomain = no

Uncomment the next line to generate "delayed mail" warnings

#delay_warning_time = 4h

readme_directory = no

See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on

fresh installs.

compatibility_level = 2

TLS parameters

#smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
#smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_tls_security_level = may

smtp_tls_CApath=/etc/ssl/certs
smtp_tls_security_level = may
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache

smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
myhostname = vmi1812900.contaboserver.net
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination =
relayhost =
mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all
virtual_mailbox_domains = sqlite:/etc/postfix/sqlite_virtual_domains_maps.cf
virtual_alias_maps = sqlite:/etc/postfix/sqlite_virtual_alias_maps.cf, sqlite:/etc/postfix/sqlite_virtual_alias_domain_maps.cf, sqlite:/etc/postfix/sqlite_virtual_alias_domain_catchall_maps.cf
virtual_mailbox_maps = sqlite:/etc/postfix/sqlite_virtual_mailbox_maps.cf, sqlite:/etc/postfix/sqlite_virtual_alias_domain_mailbox_maps.cf
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_auth_enable = yes
smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination
smtpd_use_tls = yes
virtual_transport = lmtp:unix:private/dovecot-lmtp
smtpd_milters = inet:127.0.0.1:11332
non_smtpd_milters = inet:127.0.0.1:11332
milter_mail_macros = i {mail_addr} {client_addr} {client_name} {auth_authen}
milter_protocol = 6
milter_default_action = accept
message_size_limit = 102400000

smtpd_tls_chain_files = /www/server/panel/plugin/mail_sys/cert/alinaroman.ro/fullchain.pem
tls_server_sni_maps = hash:/etc/postfix/vmail_ssl.map

aaPanel_Kern

Hello, the configuration looks normal.

aaP_bobmarley4777

Ok, I have put the SSL from main domain to the mail section domain how is it in tutorial, because i was forget to put that in the start, now I just only need to check if the smtp relay work, and if it will send to inbox in yahoo mail.

aaP_bobmarley4777

Do you think is better for me to use cloudflare than contabo dns manager? Because my emails are not going at all in yahoo mail but in google it works like a charm

aaPanel_Kern

Hello, it may be caused by the self-built mail server not complying with Yahoo’s rules.

aaP_bobmarley4777

I tested Outlook on my roundcube = OK, works
I tested Yahoo on my roundcube = Not work at all host mta5.am0.yahoodns.net[67.195.228.111] said: 553
5.7.2 [TSS09] All messages from 62.169.30.22 will be permanently deferred;
I tested Google on my roundcube = Works on Inbox

All tests was taken with sending and receiving emails from aapanel mail.

aaP_bobmarley4777

Hi Kern, I was managed to make it WORK, I installed fluent SMTP (free plugin) to wordpress, I have put aapanel details for user login into fluent SMTP, and the test mail was going to the GMAIL inbox, now I try to make all the settings for my email to go good in Yahoo-Mail, because my mails are not send at all, if you have some tips regarding this Yahoo mail issue will be good, if not I will try to fix myself from internet resources.

Best, HAIL AAPANEL!

aaP_bobmarley4777

Kern I give you a idea for aaPanel and your team, you could give the mobile android app for free for all users and you can integrate a section or a popup for sale of the premium service & support for your aaPanel, this could boost mobile traffic and sales big time, just think about, both sides win, we can restart from phone the server or see parameters an you could catch bigger market.

C ya soon, that's all on this, I managed to make it work everything.

aaP_bobmarley4777

I have tried to fix some config file in apache ,and my aapanel last version seems to explode, fix button not fix anything.

How I can handle this 🙂) looks crazy sad

aaP_bobmarley4777

Also
my php looks "static" i not know what is this 🙂) "static"

Do you have an email to give you access and to check what is happening, seems like a crazy bug of some sort afected the pannel

aaPanel_Kern

Hello, what is your web server? Have you modified the website configuration?

aaP_bobmarley4777

aaPanel_Kern webserver is apache, I have worked on my config file from apache, after the error I tried to put back the original config, and create again a ssl, but from that moment I have go into the infinity loop of errors. Thats all

aaPanel_Kern

Try deleting the site without deleting the website and database. Is it normal to add it again?

aaP_bobmarley4777

aaPanel_Kern its hard because is wowonder script, a social media script with many api and many things inside...I think I have get on the END of the rope with this project...sad

I can download the backup, but to delete and reinstala everything, hard because has many things to fix

aaPanel_Kern

Hi, can you give us your aapanel information? The server makes a snapshot backup first, if possible, please send it to kern@aapanel.com.
It is recommended to fill in the following
Post link:
SSH IP address, account password and port:
aapanel login link address and account password:
Detailed problem description:

No post link will not be able to know which user's information is, and the problem will not be processed

aaP_bobmarley4777

Yes, i have send it on email

aaP_bobmarley4777

Is the second fu**ng time it's goes on a "static" PHP, what the fuck means "STATIC?" on a client side.

Also the list of the indexes of the site exploded to a blank one, this last fu**ing version of aapanel has destroyed my time.

aaPanel_Kern

aaP_bobmarley4777
Hello, please do not modify or delete the site configuration at will. This is caused by deletion of keywords matched by the program.

aaP_bobmarley4777

Fuck fuck fuck fuck!!!!!!!!!!!!!!!! What theeeeeeeeeeeeeeee fuck is this

I have it enough of this fucking software, this is a fucking CRASH, THIS IS A CRASH, the fucking AAPANEL CRASH ON THE LAST VERSION, what the fuck is hard to understand!

aaP_bobmarley4777

« Previous Page Next Page »